Change Language: 
      English (UK)

T-REX 600 Nitro Kit (G-10,Belt,Plastic Canopy)

£249.99 £229.99

This product is currently out of stock

Product Information

This is the new lower priced version of the VERY popular T-Rex 600 Nitro. Specification is very similar to the Pro version but with the following differences. Plastic Canopy & Decals, Belt Driven Tail with Plastic Tail Case, G10 Frames/Fins & Boom Supports.


KX0160NOA : T-REX 600 Nitro Kit (G-10,Belt,Plastic Canopy)

1.Bump resistance plastic canopy. Canopy also features a rigid easy clip on/off design for fast installation and removal.

2.Simple and light weight design provides awesome flight performance nearly equal to larger helicopters while still maintaining very stable hovering and flight.

3.+-14° collective pitch is possible for extreme 3D performance.

4.Clutch, Fan and Bell assembly provide a very smooth operation even at high RPM.

5.Forward mounted tail servo helps to keep exhaust oil from entering servo also improves the CG.

6.Pitch and All servos moved forward for CG.

7.Battery tray designed for easy and clean radio gear installation.

8.Fuel Tank Capacity 440cc for about 10 minutes 3D flying.

9.Main Gear Radio 8.5:1, 1500-2200 Rotor RPM.

10.Heavy duty tail with thrust bearings.

11.95mm Tail Blades.

12. Belt driven tail for incredible 50 sized performance.

13.Rigid frame design that can also handle hard crashes without damage.

14.G-10 3K Fiber frames, fins and boom supports.

15.Super engine cooling system features large diameter fan and very efficient airflow to provide unequaled cooling and horsepower.

16.Clutch/Start shaft feature a 10mm ID one way bearing to eliminate any bearing problems during starting and flight.

17.Ready to fly weight (no fuel) is an incredible 3.20Kg (7lbs).

18.Fuel Tank designed so that no additional header tank is required.

19.New main gear with one-way bearing design for high torque.

20.New flybar paddles feature light weight and sports.

21.New flybar control set design.

22.New tail boom supports.




Main Blade Length:600mm

Main Rotor Diameter:1350mm

Tail Rotor Diameter:240mm

Engine Pinion Gear:20T

Autorotation Tail Drive Gear:180T

Drive Gear Ratio:8.1:1:4.5(E:M:T)

Flying Weight:Approx. 3200g



T-REX 600 Nitro Kits SetX1 set(w/o main blade)

Bump resistance plastic canopyX1

Fuel tubeX1

Fuel filterX1

New Fuel tube clip(A)X1

New Fuel tube clip(B)X1

New landing skidX1


Radio transmitter and electronic equipment required for assembly:

Transmitter(6-channel or more, helicopter system)

Receiver(6-channel or more)

Standard servoX4

Head lock gyroX1

Specialized servoX1

600 bladeX1set

Pitch gaugeX1

50 mufflerX1

50 engineX1

Engine starter/Starter shaftX1

11.1~14.8V Li-Po 2500mAh starter batteryX1

2 in 1 regulator(RX and Glow plug power)X1

7.4V 1900mAh Li-Po battery for regulatorX1

Fuel pumpX1

Engine fuelX1

Product Code: KX0160NOA

Customer Reviews

This product hasn't been reviewed yet. Write a review


Radio Controlled Cars | Nitro Radio Controlled Cars |  Aircraft | Boats | Railway | Scalextric & More.

© 2013 Colchester A1 Models. All rights reserved.
Developed & Hosted by Cloud Wales